DESKTOP-GPE37UV\THINKAPD
|
95c779cf76
|
修正EfemBaseRoutine中Module属性为null导致无法正常输出Alarm信息的问题。
新增UnLoad腔从CoolingAndPurge切换Online、Offline的功能。
优化UnLoad CoolingAndPurge逻辑,当Wafer进入UnLoad后随即开始计时,直到CoolingAndPurge开始的这段时间均统计到Cooling时长中,已提高效率。
修正AutoTransfer中UnLoad任务中未正确处理最后一片Wafer的问题。
修正AutoTransfer中UnLoad任务中当TMRobot拿盘准备放入UnLoad,并且Load有盘准备让TMRobot拿时,系统冲突无动作的问题。
|
2022-11-24 09:15:38 +08:00 |
DESKTOP-GPE37UV\THINKAPD
|
eea091a572
|
UnLoad腔Purge参数设定从系统Configuration移至Sequence。
|
2022-11-23 10:24:01 +08:00 |
DESKTOP-GPE37UV\THINKAPD
|
339b56e06d
|
新增UnLoad模块CoolingAndPurgeRoutine。
系统配置中新增默认的CoolingAndPurgeRoutine中的Cooling时间设定,当Sequence中的Cooling时间不可用时,回落到UnLoad\CoolingTimeFallback设定值。
修正TMView视图中的CoolingTime显示。
|
2022-11-23 09:24:24 +08:00 |
DESKTOP-GPE37UV\THINKAPD
|
e9651ccfe3
|
AutoTransfer优化。
调整LoadLock腔Purge时机,Group后总是Purge,但放Wafer后是否Purge取决于Tray的来源。
修正WaferRobot和TrayRobot IsAvailable属性计算方法。
LoadLock和UnLoad开始Purge或PrepareTransfer之前增加TMRobot是否使用Pump的判断。
|
2022-11-17 18:01:52 +08:00 |
DESKTOP-GPE37UV\THINKAPD
|
fd1fc148f8
|
修改和优化AutoTransfer。
增加触发器,修正Load/UnLoad同时Pump的异常发生时不断输出报警信息的问题。
当Load/UnLoad进行Purge或PrepareTransfer时,判断UnLoad/Load是否正在使用真空泵。
增加新类DeviceLocker。
SchedulerLoadLock和SchedulerUnLoad中增加锁机制,已避免潜在的多线程问题。
TMPressureBalanceRoutine和TMSlitValveRoutine中增加必要的延时,解决使用模拟器时DI未及时刷新导致的Interlock问题。
|
2022-11-16 14:18:05 +08:00 |
DESKTOP-GPE37UV\THINKAPD
|
331702a0d8
|
AutoTransfer中新增从UnLoad取Wafer前的Purge动作,Purge循环次数可配置。
SchedulerUnLoad中增加取Wafer前的Purge操作函数。
UnLoad\Purge系统配置中新增项目。
更新需求文档。
|
2022-11-15 17:18:13 +08:00 |
THINKPAD
|
8515476acb
|
Add project files.
|
2022-09-19 09:16:33 +08:00 |